Now hiring: Heavy Duty Equipment Mechanics. Apply Now!

Category

Drills
available

2007 Sandvik Robolt 5 Bolter

2007 Sandvik Robolt 5 Bolter Stock #: T20-46 Serial #: L07B4222 Approximate Hours: N/A Make: Sandvik Model: Robolt 5 Year: 2007 Engine: 4-cyl Deutz BF4L 1011 F, 74HP. Differential: D45 HD, heavy-duty, with differential and planetary reduction. Tires: 12.00 x 20. Hydraulic oil immersed multiple disc brakes. ROPS/FOPS Hydrastar 200 B Drill
Continue Reading
available
The Sandvik DS310c is the most compact mechanized rockbolter in the market. Its unique rockbolting concept is delivering the best ratio rockbolt length/drift height. The Sandvik DS310C is a one-man-operated electro-hydraulic rock bolter for rock reinforcement in underground mines with small and medium cross sections. Seen at the Tim McDowell Greater Sudbury Airport Yard. Front Right Corner View.

2010 Sandvik DS310C Bolter

2010 Sandvik DS310C Bolter Stock #: T20-48 Serial #: L10B5052 Approximate Hours: N/A Make: Sandvik  Model: DS310C Year: 2010 Transmission: Hydrostatic, automotive Axles: DANA Spicer 112 Tires: 12.00-20 Engine: Deutz BF4M2011, Tier II, 62kW Diesel engine control: Electronic, EMR
Continue Reading
available
The Sandvik DD420-60C is a two boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 8 – 60 m2 cross sections, this unit is located at the Tim McDowell Equipment yard in Val Caron. Right side view.

2007 Sandvik DD420-40C Jumbo

2007 Sandvik DD420-40C Jumbo Stock #: T20-47 Serial #: 107D12927-1 Approximate Hours: N/A Make: Sandvik Model: DD420-40C Year: 2007 MB OM904LA Engine (149HP) Equipped with SAHR-type, fail-safe wet disc brakes Clark 20,000 Hydrodynamic Transmission DANA Spicer Axles Heated cabin ROPS/FOPS 4-wheel-drive
Continue Reading
available

2012 John Deere 60D Excavator

2012 John Deere 60D Excavator  Stock # T160-16 Serial #: 1FF060DXKCG281165 Approximate Hours: 1500 Make: John Deere Model: 60D Year: 2012 Yanmar 4TNV98 Tier 4 Diesel Engine Auxiliary Hydraulics Quick-coupler ROPS/FOPS 12-volt electrical 16in Rubber track Reduced Tail-Swing configuration 6ft Back-fill blade TR-EX1000 Drill attachment: HL300 Drifter Hole Range: 35mm - 64mm (1-3/8” – 2.5”)...
Continue Reading
available

Boart Longyear LM90 Drill

Comes with powerpack, Reversible feed cylinder, Optional semi-automated rod handling, High torque breakout, Fail-safe rod clamp, Load sensing hydraulics, Proportional controls, Direct coupled feed frame
Continue Reading
available

Atlas Copco/Epiroc Boomer M2D

Deutz 4-cylinder EPA/Tier 3 Diesel Engine, Hydraulic pumps, Big hole drilling system, 4WD
Continue Reading
available

NEW! 2023 Boart Stopemaster

4-wheel skid steer Carrier, 4-wheel drive and braking (SAHR), 4 x Hydraulic Leveling Jacks, Deutz TD2011L0 Diesel, 73 Hp – Tier lll, 480V Electrical, Solid rubber tires, HC109 Rebuilt Montabert Rock Drill, Hydraulically Operated, 4’ Feed Assembly, with Hydraulic Centralizer, Independent Feed Crowd, 24 VDC Remote Drilling Controls W/Remote Pendant, 3” diameter holes & up...
Continue Reading
sold

Tamrock/Sandvik Commando DC120 Drill

Tier 3 Engine, Hydraulic Rock Drill RD106, Articulated Boom DB 120, Power pack diesel driven hydraulic pumps and on-board compressor, Winch, Dust Collector
Continue Reading
available

Tamrock/Sandvik Commando 300 Drill

HL 300 Hydraulic top hammer rock drill, 73 hp Diesel Engine, Winch, Dust Collector, Remote Control, Less than 100 engine hours, DB 300 articulated boom, Diesel driven hydraulic pumps and on-board compressor 
Continue Reading
available

2022 Boart Stopemate Drill

Underground approved, Hydraulic cylinders, Able to tram through a 1.27 x 1.9 m (4.17 x 6.25 ft) opening with pivoting traverse feature, Back height drilling of 2.44 m (8 ft), Can fit into most cages with no disassembly, Fully pneumatic, Ideal for captive areas and narrow vein mining, Modular design with efficient dismantling and reassembly...
Continue Reading
1 2 3 4